Close menu

Micro Canal

Maximum warmth, minimum dimensions

Micro Canal

Maximum warmth, minimum dimensions

The latest Jaga trench heating solution is only 6 cm high and 13 cm wide. With small, but powerful dynamic Low-H2O heat exchangers and super-quiet fans that are no wider than a thermostatic radiator valve, it creates immense power. Micro Canal combines minimalist aesthetics and architectural freedom with a power that breaks all temperature records! Micro Canal integrates harmoniously with any interior. This provides every architect, designer or engineer the greatest possible freedom to execute each architectural project without making any compromises for the heating system.

Top Performers
Trench heating
Standard
Low water temperature (35-50°C)
High water temperature (55-45°C)

Each dimension for every place

This product is available in several models. You can search for the model with the dimensions suitable your solution.

Search model

Sizes & outputs

Sizes

Outputs table

Model Height (cm) Length (cm) Type 75/65 ˚C 55/45 ˚C 35/30 ˚C
Standard - - - - - -
Standard 6 60 - 390 234 98
Standard 6 95 - 780 468 195
Standard 6 130 - 1170 702 293
Standard 6 165 - 1560 936 390
Standard 6 200 - 1950 1170 488

Grilles

Stainless steel
Stainless steel
  • Type: Special
  • Material: Stainless steel
  • Frame: Stainless steel
Stainless steel lacquered
Stainless steel lacquered
  • Type: Special
  • Material: Stainless steel
  • Frame: Stainless steel

Connection sets

All Jaga Low-H2O radiators are supplied with brackets, including screws, and with air vent and drain plug. To make it even easier, Jaga also off ers complete connection sets. All Jaga valve sets are completely lockable and can be pre-set during installation.

Downloads

Brochure
Micro Canal - Brochure INT
Product description
Micro Canal - Product description INT
Manual
Micro Canal - User manual INT
Manual
Micro Canal - maximum cable length - Manual - INT

Specifications

You can find here more technical information about the product.

Options

POWER SUPPLY

  • for DIN-rail or wall mounting
  • safety: UL1310 Class 2
  • output voltage between 24 - 28 VDC
  • input voltage 90 - 264 VAC
  • screw connection
  • LED display
    green = on
    red = DC low power / short-circuit

JAGA TWO-WAY VALVE AND THERMOELECTRIC DRIVE 230V

  • only for mounting on the distributor, not in the Micro Canal!
  • with varistor to protect against power surge
  • with position indicator (open/closed)
  • sleeve couplings have to be provided by the installer

VALVE UNIT

  • length 35 cm
  • motorised thermostatic valve 24 VDC with lockshield
  • outer casing with height control
  • inner casing with stainless steel grille support
  • stainless steel grille, natural coloured or lacquered
  • protection block

EMPTY HOUSING

  • to fill open spaces for a continuous installation
  • outer casing with height control
  • inner casing with stainless steel grille support
  • stainless steel grille, natural coloured or lacquered
  • protection block(s)
  • 2 head pieces

CORNER PIECE

  • aluminium cover plate in stainless steel effect (SSS), or lacquered in other Jaga colours (SSC)
  • outer casing with anchorage elements
  • polyethylene-protective mounting block(s)
  • fully assembled inner housing with stainless steel grille support
  • height adjustment with fine adjustment for alignment with the finished floor

FEET WITH HEIGHT ADJUSTMENT FOR RAISED FLOORS

  • lacquered in dark grey RAL 7024.
  • easy installation by means of “stainless steel spring system”
  • 1 set includes 2 height adjusting controls
Delivery
  • stainless steel grille
  • outer casing with anchorage elements
  • polyethylene-protective mounting block(s) and three connection holes on the left hand side
  • pre-assembled internal duct with stainless steel grille support
  • tangential activator(s) 24 VDC and integrated stainless steel filter
  • dynamic heat exchanger with flexible 1/2” stainless steel connectors, length 15 cm
  • height adjustment with fine adjustment for alignment with the finished floor.
  • automatic activator on/off switch by means of temperature sensor
Connectors

HYDRAULIC CONNECTION

  • one-sided 2-pipe connection on the left
  • always install Micro Canal with the heat exchanger on the window or wall side
  • 2 x 1/2” stainless steel hose included
  • allow extra space for curtains, in between the window and the Micro Canal.
  • the heat exchanger must always be kept accessible for maintenance purposes
  • if the appliance is not mounted flat on the floor, the space between the bottom of the appliance and the floor should be filled with a stable filler material.

ELECTRIC CONNECTION

  • clamp connector for electrical connection 24 VDC to the left, to be connected via external power supply. Install a thermostat with a potential-free contact to control the water supply with the help of a zone valve. Micro Canal automatically switches on the activators via a temperature sensor

Thank you for contacting us. We will be in touch soon

To:

Contact us